How Much Does Appliance Repair Cost?

Find out the average cost for professional appliance repair from Cooper Appliance Repair:

Most kitchens are full of several electrical appliances. An electrical stove, dishwasher or refrigerator must have up-to-code wires. If an electrical appliance is improperly installed, it poses a legitimate risk of fire. In order to guarantee your electrical kitchen appliances are up to snuff, it’s important to call an experienced service for appliance repair.

DIY electrical troubleshooting for appliances is not a recommended plan of action. There are a handful small repairs where DIY might be an option. In those cases, be sure to use the proper tools and to always shut off the power.

Fixing large kitchen appliances, however, is much more intensive. You should not plan on DIY repair. Your range, for one example, will need a 250- or 125-volt circuit whether it is 100% electrical or gas-powered, plus you will need no less than two 20-amp, 125-volt circuits to operate smaller household appliances. These circuits will support numerous electrical outlets, but do not overload them — which often means, a third is a smart idea.

The risk of a short (which could cause serious injury or possibly death) during any bigger job in most cases will not be worth it. Just call a professional service in CITY, STATE.

You will want to search for appliance repair companies in CITY on on Google. Find companies with a lot of customer reviews. Or find a a referral from a family member if you’re running into issues with an oven, freezer or refrigerator.

Hiring professional appliance repair companies starts with contacting a repairman in CITY that has experience in service of kitchen appliances. Some companies are appliance-specific, and won’t offer repair for all household appliances.

The reason some appliance repairmen aren’t safe to fix a kitchen appliance is due to all of the electrical appliances in a kitchen that use water . Most refrigerators need water to make ice and dishwashers always need water to operate. Water is potentially dangerous should there be electrical repairs.

If electrical repairs aren’t done the right way and a waterline ruptures, for example, there is a very good chance of electrocution. Electricity and water don’t mix.

And you want a CITY contractor who knows how to deal with both elements.

Trained appliance repairmen can cost close to $45 to $75 per hour for their work, and solo contractors might charge between $70 and $115 per hour. This might seem expensive, that is because it’s better to pay a more expensive price for high-quality work. If a repair company costs cheaper than $30 an hour, you should be skeptical.

It is important to be sure the service has a permit from CITY for any kind of electrical repairs. Some questionable technicians will say that they do not require a permit, but never listen. Always double check with CITY officials.

Most technicians in CITY often charge a built-in amount for their trip, from $50 to $75. You’ll have to pay the complete price whether or not the repair is performed, so it’s smart to have a list available of appliances for the company to inspect.

The national average is $130 for oven repairs – companies in CITY will often charge $65 to $140 an hour. Expect a $40 to $80 trip charge too for the company to drive and troubleshoot the issue.

The prices for new appliances can range between $375 and $8,000. The broad range depends the kind of kitchen appliance, such as a expensive refrigerator to a low-cost oven.

Troubleshooting or replacing an electrical appliance is one of the most complex repair projects you can require in a home.

A way to avoid these types of issues is listening attentively to a repairman when he completes an estimate for repair. Exact wiring types need to be used dependent on the appliance, and colors of wires (for ground or neutral) might differ when laws or requirements are renewed.

Additionally, several jurisdictions require arc fault protection for kitchen electrical circuits plus ground fault circuit interruption (GFCI) protection. If the contractor fails to mention this, or suggests you don’t “need” them, it’s time to call someone else.

In addition, it is important to monitor a technician attentively when he or she completes the initial inspection of the range. If it is a kitchen appliance the company is going to install, ask if it can use the exact same circuit or if it needs an enhancement since there are major size and electrical power usage differences in the most recent models. The same recommendation goes for dishwashers and stoves.

A professional should be able to convey what it is they are going to repair, why it is necessary and justify each piece of the final fee, which likely includes appliance parts, labor and sometimes miscellaneous. Some appliance repair companies willing to wave the trip fee if service is performed.

OTHER RESOURCES:

Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts